< Fields Hot Asphalts

Product Information Sheet
T1, T2, T3 & T4 MeltPac, MeltKeg, & MeltBulk
Type 1, 2, 3 & 4 Hot Applied Asphalt

USES: Fields Hot Applied Asphalts protect surfaces exposed to the weather: They are excellent protective coatings for roofs, foundations, concrete, and metal. In addition, Fields Hot Asphalts are applied to install roofing and waterproofing sheets. Fields Hot Applied Asphalts are compatible with SEBS, APP, and SBS rubber modified asphalts and will adhere to most surfaces.

DIRECTIONS: Before applying Fields Hot Asphalt as a protective coating, clean away all loose gravel, dirt, vegetation, and debris from the application area. The application surface shall be firm, clean, dry, frost-free, and smooth. Seal any leaking penetrations and repair membrane damage with M300 RubrMastic. Uniformly apply a coating of Fields Hot Asphalt at the rate of 30 pounds per 100 square feet. Install any of the following Fields roofing and waterproofing sheets with Fields Hot Applied Asphalt: M60 RubrPoly, M64 RubrPoly2, F50 PolyShield, F55 PolyShield2, M62 RubrGlas, M66 RubrGlas2, F52 GlasBase2, F56 GlasPly6, or F54 GlasPly4. Uniformly apply 30 pounds per 100 square feet of Fields Hot Asphalt for base and ply sheet adhesives. For maximum protection and reduced energy costs, apply M800 RubrStar over Fields Hot Applied Asphalts. Allow Fields Hot Applied Asphalts a minimum of 90 days to set up before applying the RubrStar.

DESCRIPTION: Fields Hot Applied Asphalt is an asphalt that provides superior elastic performance against thermal shock, the daily expansion and contraction of a roof membrane caused by temperature changes. Roof membranes are also penetrated by the sun's destructive UV (ultraviolet) rays. W rays destroy a roof's elasticity. Roofs made brittle and weak from W rays easily break under the assault of thermal shock cycles. Fields Hot Applied Asphalt is your best defense against these attacks. With Fields Hot Applied Asphalt, your roofing and waterproofing installations will perform much longer. Fields Hot Applied Asphalts have a UL (Underwriters Laboratories) Class A Fire Rating.

SPECIFICATIONS: Fields Hot Applied Asphalts exceed the standards of the American Society for Testing and Materials ASTM D 312.

PACKAGING: T3 & T4 MeltPacs are available in 50 pound bricks, T1, T2, T3, & T4 MeltKeg and MeltBulk are available in 100 pound kegs and bulk.

Base Sheet Adhesive lbs
Coated BUR Sheets 30
Uncoated BUR Sheets 30
SEBS, APP, & SBS Sheets 30
Ply Sheet Adhesive lbs
Coated BUR Sheets 30
Uncoated BUR Sheets 30
SEBS, APP, & SBS Sheets 30
Protective Coating lbs
Coated BUR Sheets 30
Uncoated BUR Sheets 30
SEBS, APP, & SBS Sheets 30
Miscellaneous lbs
Cap Sheet Adhesive 30
Rigid Insulation 30
.25" Pea Gravel 60

T3 & T4 Fields Hot Applied Asphalts are packaged in meltable plastic brick packages. Each MeltPac weighs 50 pounds, making it possible to place the entire MeltPac into an asphalt kettle and completely melt the brick, including the plastic wrapper and the asphalt. In addition, Fields Hot Applied Asphalt eliminates all disposal costs, reducing the volume of waste sent to land fills. Fields Hot Applied Asphalt keeps your job site clean of asphalt and carton debris. With Fields Hot Applied Asphalt, the need to tear open cardboard cartons and to chop apart the conventional 100 pound asphalt plugs is eliminated. Since employees are no longer required to use axes, axe injuries are eliminated. Also, back injuries are reduced because the 50 pound MeltPac brick is half the weight of the 100 pound asphalt kegs for employees to lift.

Type 1,2,3,4 Hot MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright 1999 Fields Company, LLC. All rights reserved.