< Fields Coatings & Mastics 700 to SW Series

Product Information Sheet
F900 BlackShield
Asphalt Pavement Sealer

USES: F900 BlackShield protects asphalt roadways, driveways, parking areas, playgrounds, sport courts, and other similar paved areas. BlackShield is also applied so as to beautify asphalt pavements with a rich, black surface color. BlackShield can be applied over asphalt aggregate patches after they have set up. BlackShield provides a skid resistant surface, and replenishes the asphalt particles that are lost due to oxidation and erosion. Furthermore, BlackShield improves drainage by forming a smooth surface, making it easier to sweep and clean with water.

DIRECTIONS: F900 BlackShield is friendly to apply, especially in warm, dry conditions. BlackShield sets up in approximately 1 to 4 hours, depending on weather conditions. Apply with a squeegee or medium stiff bristle brush. Do not apply BlackShield if rain or excessive humidity is imminent either during or immediately following application; or if the outside temperature is below 50° F. Clean gravel, dirt, vegetation, and debris from the application area. Clean oil and gas spots and prime with A940 OilSpot. Fill cracks between .25" and 1.0" with A910 RubrFilr. Clean and fill potholes in the asphalt pavement with A950 AtcoPatch. Apply BlackShield directly from the container without diluting. Thoroughly mix BlackShield just prior to application. Apply BlackShield in two layers at the uniform rate of 1.5 gallons per 100 square feet per layer, totaling 3 gallons per 100 square feet for the entire application. For a premium installation, apply the second layer perpendicular to the first layer. The actual rate of application will depend upon the condition of the asphalt pavement surface being coated. Allow a minimum of 24 hours to dry before traffic is permitted over the BlackShield. Before releasing traffic, test the BlackShield to confirm that it has adequately set up.

DESCRIPTION: F900 BlackShield is a quality, high solids emulsified asphalt manufactured from 100% commercial paving grade asphalt. BlackShield has been engineered to provide a premium seal coating that protects asphalt pavements from the degrading effects of the environment. BlackShield also provides superior elastic performance against thermal shock, the daily expansion and contraction of a pavement caused by temperature changes. Additionally, BlackShield protects asphalt pavements from the sun's destructive UV rays. BlackShield is your best defense from the elements. With BlackShield your asphalt pavements will perform much longer.

SPECIFICATIONS: F900 BlackShield exceeds the standards of the American Society for Testing and Materials: ASTM D 2939. Maximum VOC 0 grams per liter.

PACKAGING: F900 RubrPave is available in 5 gallon pails, 55 gallon drums, and bulk.

F900 MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright © 2003 Fields Company, LLC. All rights reserved.