< Fields Coatings & Mastics 400 to 600 Series
Product
Information Sheet
F540 SunShield2
2.0 lb Nonfibered Aluminum
USES: F540 SunShield2 protects surfaces exposed to the sun's destructive ultraviolet (UV) rays. SunShield2 increases the service life of roofs, as well as reduces energy costs by lowering inside building temperatures. SunShield2 is compatible with SEBS, APP, and SBS rubber modified asphalts and will adhere to most surfaces including roofing, wood, metal, rubber, plastic, glass, and concrete. SunShield2 forms a metallic, reflective shield that protects and beautifies.
DIRECTIONS: New asphalt surfaces shall be allowed to set up a minimum of 90 days prior to applying F540 SunShield2. SunShield2 is friendly to apply, especially in moderate temperatures. Clean gravel, dirt, vegetation, and debris from the application area. Seal any leaking penetrations and repair all surface fissures with M300 RubrMastic and PolyWeb. Prime the surface to be coated along with any uncoated masonry and new metal with M400 RubrPrime. Use a thick nap roller, medium stiff bristle brush, or low pressure spray equipment to apply SunShield2 directly from the container without diluting. Thoroughly stir SunShield2 just prior to application, working the aluminum pigment up from the bottom of the container. Apply SunShield2 at the rate of 1 gallon per 100 square feet.
DESCRIPTION: F540 SunShield2 is a 2.0 lb nonfibered aluminum coating made from 100% oxidized roofing asphalt. SunShield2 has been engineered to provide a Class A Fire Rating over most roofing including SEBS built-up roofs. Select raw materials have been formulated to make SunShield2 a premium aluminum coating. SunShield2 provides superior elastic performance against thermal shock, the daily expansion and contraction of a roof caused by temperature changes. In addition, the sun's UV rays attack the roof membrane making it brittle and weak, inducing membrane ruptures during thermal shock cycles. SunShield2 is your best defense against these attacks. With SunShield2, your roofing installations will perform much longer. SunShield2 is asbestos free.
SPECIFICATIONS: F540 SunShield2 exceeds the minimum standards of the American Society for Testing and Materials ASTM D 2824 Type 1. Maximum VOC 500 grams per liter.
PACKAGING: F540 SunShield2 is available in 5 gallon pails, 55 gallon drums, and bulk.
TECHNICAL INFORMATION:| Approximate Pounds Per Gallon | 7.7 |
| Minimum Percent Nonvolatile Weight | 40 |
| Approximate Hours Set Up Time to the Touch | 6 |
| Optimum Application Temperature Range in deg. F | 50 to 100 |
| Application Consistency | Brush, Spray, Roller |
| Surface Type | Gallons |
| Asphalt & Wood | 1 gal |
| APP & SBS Modified Bitumen Sheets | 1 gal |
| Concrete & Metal | 1 gal |
| Granular Minerals | 2 gals |
About Fields | Services
| Product Guide | Advertising
| BUR Systems
Copyright © 2003 Fields Company, LLC. All rights reserved.