< Fields Coatings & Mastics 100 to 300 Series

Product Information Sheet
F200 PowrBond
Plastic Asphalt Cement

USES: F200 PowrBond seals openings exposed to water penetration. You can effectively seal around chimneys, vents, pipes, air conditioning equipment, skylights, drains, flashings, and sheet metal. PowrBond also repairs surface fissures, seals down shingle tabs, stops leaking nail heads, cements laps on roll roofing, and bonds roofing sheets to the deck. PowrBond is compatible with SEBS, APP, and SBS modified bitumen roofing products and will adhere to most surfaces including roofing, wood, metal, glass, and concrete.

DIRECTIONS: F200 PowrBond is friendly to apply, especially in warm temperatures. Apply with a broad putty knife. Warm PowrBond to room temperature for easiest application. Clean gravel, dirt, vegetation, and debris from the application area. Make sure the application surface is smooth, firm, frost-free, and dry. Apply PowrBond directly from the container without diluting. Seal areas exposed to water penetration with PowrBond. Generously apply a minimum .5Ē thick layer of PowrBond over the exposed area. Make a 3 layer repair with PowrBond and PolyWeb over fissures or to reinforce degraded areas. First trowel a generous application of PowrBond over the application area and beyond the width and length of the PolyWeb you intend to install. Second, lightly trowel the PolyWeb into the PowrBond. Third, carefully trowel a generous application of PowrBond over the entire repair, making sure to completely cover the PolyWeb. For severe fissures, apply additional layers of PolyWeb and PowrBond.

DESCRIPTION: F200 PowrBond is a quality plastic asphalt cement manufactured from 100% oxidized roofing asphalt. Select raw materials have been formulated to make PowrBond a premium product. PowrBond provides superior elastic performance against thermal shock, the daily expansion and contraction of a roof caused by temperature changes. In addition, the sunís UV rays attack the roof membrane making it brittle and weak, inducing membrane ruptures during thermal shock cycles. PowrBond is your best defense against these attacks. With PowrBond your roofing and waterproofing installations will perform much longer. PowrBond is asbestos free.

SPECIFICATIONS: F200 PowrBond exceeds the standards of the American Society for Testing and Materials ASTM D 4586 Type 2. Maximum VOC is 275 grams per liter.

PACKAGING: F200 PowrBond is available in 1 gallon cans, 3 gallon pails, and 5 gallon pails.

TECHNICAL INFORMATION:
Approximate Pounds Per Gallon 9
Minimum Percent Nonvolatile Weight 70
Approximate Hours Set Up Time to the Touch 24
Days Set Up Time Before Applying Reflective Coating 90
Optimum Application Temperature Range in deg. F 50 to 100
Application Consistency Trowelable

RECOMMENDED APPLICATION RATE PER 100 SQUARE FEET:

N/A

 

F200 MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright © 2003 Fields Company, LLC. All rights reserved.