< Fields Coatings & Mastics 100 to 300 Series

Product Information Sheet
C240 TileBond
Plastic Tile Cement

USES: Apply C240 TileBond to install tile roofs. Also, TileBond adheres vertical flashing installations in place, especially during hot weather conditions. You can effectively seal around chimneys, vents, pipes, air conditioning equipment, skylights, drains, and sheet metal. TileBond repairs surface fissures, seals down shingle tabs, stops leaking nail heads, cements laps on roll roofing, and bonds roofing sheets to the deck. TileBond is compatible with APP, SBS, and SEBS modified bitumen roofing products and will adhere to most surfaces including roofing, wood, metal, and concrete.

DIRECTIONS: C240 TileBond is friendly to apply in warm temperatures. Warm TileBond to room temperature for easiest application. Clean away all loose gravel, dirt, vegetation, and debris from the application area. Use a broad putty knife to apply TileBond directly from the container, without diluting. Trowel TileBond directly to surfaces and press the tiles into place making sure complete adhesion is achieved. Also, apply TileBond directly to vertical surfaces to install flashings. Press the flashing sheets into the TileBond until complete adhesion is obtained. Smooth out any wrinkles that may have formed. Seal areas exposed to water penetration with TileBond by generously applying a minimum .25" thick layer of TileBond over the exposed area. Repair surface fissures with TileBond using PolyWeb for reinforcement. Form a three layer repair by first troweling a generous application of TileBond over the break and beyond the width and length of the PolyWeb you intend to install. Second, lightly trowel the PolyWeb into the TileBond. Third, carefully trowel a generous application of TileBond over the entire repair, making sure to completely cover the PolyWeb. For severe breaks, apply additional layers of PolyWeb and TileBond.

DESCRIPTION: C240 TileBond is a quality plastic tile cement manufactured from 100% oxidized roofing asphalt. TileBond has been specially formulated to adhere roof tiles, especially during warm temperatures. TileBond will also adhere to glassy surfaces, and under water. TileBond can be applied for the same applications as C250 RoofFlash. TileBond provides superior elastic performance against thermal shock, the daily expansion and contraction of a roof caused by temperature changes. With TileBond your roofing and waterproofing installations will perform much longer.

SPECIFICATIONS: C240 TileBond exceeds the standards of the American Society for Testing and Materials ASTM D2822, Type II, Class Il. Maximum VOC is 275 grams per liter.

PACKAGING: C240 TileBond is available in 3 gallon pails, and 5 gallon pails.

TECHNICAL INFORMATION:
Approximate Pounds Per Gallon 8.1
Minimum Percent Nonvolatile Weight 70
Approximate Hours Set Up Time to the Touch 24
Days Set Up Time Before Applying Reflective Coating 90
Optimum Application Temperature Range in deg. F 50 to 100
Application Consistency Trowelable

RECOMMENDED APPLICATION RATE PER 100 SQUARE FEET:

N/A

 

C240 MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright 2003 Fields Company, LLC. All rights reserved.