< Fields Coatings & Mastics 100 to 300 Series

Product Information Sheet
C100 RoofCoat
Asphalt Coating & Adhesive

USES: C100 RoofCoat protects surfaces exposed to the weather. RoofCoat is a superior asphalt protective coating for roofs, foundations, gutters, concrete, metal, and wood. Also, use RoofCoat to cement in place rigid insulation boards, to adhere Fields reinforcing sheets, to install Fields reflective cap sheets, and to apply Fields reflective minerals. RoofCoat is compatible with SEBS, APP, and SBS roofing products, and will adhere to most surfaces including roofing, skylights, foundations, wood, metal, glass, and concrete.

DIRECTIONS: C100 RoofCoat is friendly to apply, especially in warm temperatures. Apply with a medium stiff bristle brush, a squeegee, or asphalt cutback spray equipment. Warm RoofCoat to room temperature for easiest application. Clean gravel, dirt, vegetation, and debris from the application area. Make sure the application surface is smooth, firm, frost-free, and dry. Apply RoofCoat directly from the container without diluting. Generously apply a protective coating with RoofCoat at the uniform rate of 5 gallons per 100 square feet. First repair fissures, seal leaking penetrations, fix broken flashings, and reinforce degraded areas. Make a 3 layer repair with RoofCoat and PolyWeb over fissures or to reinforce degraded areas. Refer to the PolyWeb label for installation directions. Install a Fields new roof, reroof, recover roof, reinforced coating, or waterproof membrane with RoofCoat. Uniformly apply 5 gallons per 100 square feet of RoofCoat as an adhesive under and between each layer of sheets, and as the protective surface coating. Refer to the label on the Fields reinforcing sheet selected for installation directions. For maximum protection and reduced energy costs, apply M800 RubrStar over the RoofCoat. Allow the RoofCoat a minimum of 90 days to set up before applying the RubrStar.

DESCRIPTION: C100 RoofCoat is a quality asphalt coating and adhesive manufactured from 100% oxidized reroofing asphalt. Select raw materials have been formulated to make RoofCoat a premium product. RoofCoat provides superior elastic performance against thermal shock, the daily expansion and contraction of a roof caused by temperature changes. In addition, the sun's UV rays attack the roof membrane making it brittle and weak, inducing membrane ruptures during thermal shock cycles. RoofCoat is your best defense against these attacks. With RoofCoat your roofing and waterproofing installations will perform much longer. RoofCoat has a UL Class A fire rating.

SPECIFICATIONS: C100 RoofCoat exceeds the standards of the American Society for Testing and Materials ASTM D 4479 Type 2. Maximum VOC is 350 grams per liter.

PACKAGING: C100 RoofCoat is available in 5 gallon pails, 55 gallon drums, and bulk.

TECHNICAL INFORMATION:
Approximate Pounds Per Gallon 7.3
Minimum Percent Nonvolatile Weight 60
Approximate Hours Set Up Time to the Touch 24
Days Set Up Time Before Applying Reflective Coating 90
Optimum Application Temperature Range in deg. F 50 to 100
Application Consistency Brush, Spray, Squeegee

RECOMMENDED APPLICATION RATE PER 100 SQUARE FEET:
Membrane Type Base Adhesive Interply Adhesive Surface Coating
Polyester & Fiberglass BUR Sheets 5 gals 4 gals 5 gals
Nonwoven Polyester Sheets 5 gals 4 gals 5 gals
APP & SBS Modified Bitumen Sheets 4 gals 3 gals 5 gals
Wide Weave Polyester & Fiberglass Sheets 3 gals 2 gals 3 gals

C100 MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright 2003 Fields Company, LLC. All rights reserved.